Combination Smoke CO Alarm With Test Button Photoelectric Smoke Alarm Detector

Combination Smoke & CO Alarm With Test Button Photoelectric Smoke Alarm Detector

2-in-1 Accurate, Reliable & Highly Sensitive Alarm: Equipped with both photoelectric smoke sensor and electrochemical CO sensor that work independently of each other; every second counts; detects both fast and slow-burning fires, and instantly notifies you when dangerous smoke or CO concentration is detected while minimizing false alarms; provides the ultimate protection from 2 deadly threats, all contained in 1 unit
LCD Display: Clearly indicates real-time carbon monoxide (CO) concentration in the surrounding air, as well as the remaining battery life and working status of the alarm
Test and Silence Button: Tests the unit for proper operation and resets the smoke and carbon monoxide alarm, Alarm Volume: Loud > 85dB(A) at 1 meters. Loud 85-decibel alarm is designed to be heard easily. Pls kindly press if false alarm.
Easy Install and Use: The alarm can easily install with mounting bracket. No hardwired anymore, very convenient to install at home or bedroom - wall mount, screws included.

Specification

Silence Mode

During the unit is alarming,youcanpush the test button,it will be paused the unit alarming for approx 10minutes.The red LED will flash once every 8 seconds,it indicates the smoke alarm device is running into the silence mode. The silence feature is to be used only when a known alarm condition,such as smoke from cooking activates the alarm.The smoke alarm devicewill automatically reset after approximately 10minutes,if after this period,particles of combustion are still present,the alarm will sound again.

CAUTION
Before using the alarm silence (silence),identify the source of the smoke and be certain a safe condition exists .

Maintenance and Cleaning

There are a few simple steps you need do to keep it working properly.
1. Test the alarm once a week.
2. Clean the alarm surface with a soft brush or cloth every month.
3. Do not paint the alarm. Paint will seal the vents and interfere with the sensor’s ability to detect smoke.
4. Never attempt to disassemble the alarm to clean inside.This will In addition to weekly testing, the alarm requires periodic cleaning to remove dust, dirt, and debris.Clean the alarm at least once a month to remove dust, dirt, or debris. Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm device. If there is a defective battery or other failures, you can refer to “Trouble shooting” for solution, if there are still failures during warranty, you can return to your retailer.

Replaced Battery

1. The low battery signal can last for maximum 30 days, please replace the batteries in time to keep it working properly.
2. Battery required: standard 1.5V AA batteries.
3. Acceptable brand: Duracell MN1500, Golden Peak LR6, GP GN15A, etc.
4. Correctly install the positive and negative poles of the battery (“+” & “-”)
5. Waste batteries should not be placed into any household waste or recycling bin as all of them have the potential to spark. Check with your Local Authority for recycling advice.

FAQ

Q: How can i place an order?
Please provide the details of your requirements as clear as possible. So we can send you the offer at the first time.
A: For designing or further discussion, it is better to contact us with Skype / email / phone, in case of any delays.

Q: How about the quality of the personal alarm ?

A:We produce every product with good quality materials and fully test three times before shippment. What is more, our quality

areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.

Q: Can i have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q:What is your terms of delivery?
A: We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost effective for you.

Q: How do you ship the goods and how long does it take arrive?

A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.

Shenzhen Ariza Electronic Co., Ltd was founded in 2009 in Shenzhen, we are specialized factory with strength of security alarm products for 12years.Covering an area of 2000 square meters and we have 12 years experience on this market and have been one of the leading manufacturers of electronic personal security devices.OEM/ ODM is surpported, we pay more and more attention to new products development.

We have designed various popular models with Ariza features and own the patents and hundreds of new models for our clients all over the world, our clients such us: iMaxAlarm, SABRE, Home depot .

Workshop covering an area of 1000 square meters. We not only owns advanced production equipment but also have over 50 valuable and skilled employees.The monthly output reaches 100000PCS and 90% products being exported to overseas markets mainly in EU and North America.

Moreover, We have a comprehensive quality assurance systems and equipments, in addition to well-equipped laboratories and testing equipments. Systems of IQC, PQC,and FQC all ensure the quality of our products Finished product warehouse and raw material warehouse covering an area of 600square meters. We have enought room for finished goods, so the lead time is very short, the order of less than 1000 can be delivered within 3 days.

We also have gained certifications from the third party organizations, factory has passed BSCI, ISO9001 and all products are internationally recognized with CE or RoHS, FCC compliance for exporting to all over the world.

"Customer First"is our business faith, and we would like to share our knowledge, technologies and experience with more customers for mutual benefits and development.We will do our best to provide satisfied products and competitive prices for our customers. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.