Assembly Combination Micro Gyroscope , Assembly Replace STIM210 Triaxial Gyroscope

Micro Gyroscope Assembly Micro Gyroscope Combination Triaxial Gyroscope Assembly Replace STIM210​

The micro gyroscope assembly is composed of a three-axis gyroscope, a temperature sensor, a signal processing board, a structure and necessary software, and is used for measuring the three-axis/two-axis angular rate of a carrier, and outputting three angular rate data subjected to error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation and the like) through an RS-422 serial port according to an agreed communication protocol.

1 Gyroscope specifications

1. Measuring range: ± 400 °/s
2. Zero-bias stability (@ Allan variance): ≤ 1 °/H
3. Zero-bias stability (1s smooth, 1σ, room temperature): ≤ 10 °/H
4. Zero bias error within full temperature range: ≤ 20 °/H
5. Random walk: ≤ 0.2 °/√ H
6. Zero-bias repeatability: ≤10°/h
7. Zero bias acceleration sensitivity: ≤ 1 °/H/G
8. Resolution: ≤ 0.001 °/s
9. Scale factor nonlinearity: ≤ 100ppm
10. Repeatability of scale factor: ≤ 100ppm
11. Cross coupling: ≤ 0.1%
12. Bandwidth: ≤250Hz
13. Weight: (52 ± 5) G

2 Power supply requirements

1. Supply voltage: (+ 5 ± 0.5) V (DC);
2. Power supply current: working current < 0.3A;

3 Environmental adaptability

1. Working temperature: (-45 ~ 85) ℃
2. Storage temperature: (-55 ~ 105) ℃
3. Vibration: 10 ~ 2000Hz, 6.06g
4. Impact: 5000 G, 0.1ms

Drawing:

Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of aerospace electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent  team. The technical team is composed of many outstanding experts with more than 50 years of comprehensive industry  experience. The company has strong technical strength in the fields of integrated photonics, fiber optic gyroscopes, inertial navigation, etc., and is able to provide users with professional design, development, production and services of inertial devices and related simulation software.

Technical Advantages

Firepower technology fully possesses independent design capabilities in micro nano integrated fber optic gyroscopes, silicon optical chip integrated fiber optic gyroscopes and complete inertial navigation system technologies. We have accumulated over ten years of research and development experience in the fields of optical sensing, MEMS sensing, and inertial navigation, with strong technical strength. We have mastered multiple core technologies including MEMS gyroscope and acceleration chip design, multi-core fusion technology, silicon optical chip technology, optical sensing, and inertial navigation.With the accumulation of technology, we have the ability to scale up industries and are in a leading position worldwide. Not only can we provide customers with high-performance products, but we can also significantly reduce production costs.

SILICON OPTICAL CHIP + OPTICAL FIBER SENSING UNIT

Production Capacity

Firepower has four subsidiaries with production line respectively, which are MEMS inertial product production line, fiber optic inertial production line, quartz accelerometer production line and motion simulation table production line. A total investment of 15, 000 square meters has been built for scientific research and production, including 650 square meters 10, 000-class clean rooms that meet national standards, electrical-mounting production lines and environmental testing centers.

With more than ten years development, Firepower has become a high-tech enterprise with high level of craftsmanship and comprehensive products range in China. We have complete production line from chips to finished products after all testing, providing first level products among peers in domestic and over-sea market.

Specially in 2019, we set up a micro-nano fiber optic gyroscope production line which is the only one in China, and it break through the technical bottleneck of the traditional closed-loop fiber optic gyroscope technology, bringing a new FOG of more precise, smaller and cheaper to the inertial navigation market.

The company has more than 100 patents and software copyrights, among which the core leading technologies are:

1) China′s only micro-nano fiber optic gyroscope production technology

2) Quartz flexible accelerometer pendulum design, etching, vacuum sputtering coating technology

3) Full-temperature high-precision MEMS inertial measurement and navigation technology;

4) Fiber optic gyroscope precision assembly and testing technology

5) Quartz flexible accelerometer range adjustment, scale factor, bias value, scale factor, temperature hysteresis, long-term repeatability measurement and modulation technology

6) Quartz accelerometer high temperature resistance (180° ) and high seismic design technology and process

7) Large dynamic three-axis turntable process design technology

Production Environment

We have built clean rooms, electrical assembly production line, and environmental testing center that comply with the national "Clean Building Design Specification". It has complete precision measuring instruments and testing equipment, simulation testing systems, high and  low temperature test chambers, vibration and shock test benches, precision optical indexing heads, functional centrifuges, mechanical testing rooms ,anechoic chambers, multi axis turntables and other instruments and testing equipment to ensure product quality.