Sign In | Join Free | My portofva.com |
|
Categories | Network Packet Sniffer |
---|---|
Brand Name: | NetTAP® |
Model Number: | MATRIX-TCA-CG; NT-FTAP-32QCX |
Place of Origin: | China |
MOQ: | 1 SET |
Price: | Can Discuss |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 100 sets per month |
Delivery Time: | 1-3 Working Days |
Packaging Details: | Outer Carton plus Inner Foam |
Certification: | CCC, CE, RoHS |
tunneling protocols: | GTP, GRE, PPTP, L2TP and PPPOE |
GRE Tunneling: | Generic Routing Encapsulation |
GRE tunnel: | carry MPLS LDP messages, established LDP LSP |
Encapsulation Stripping: | stripping VXLAN, GTP, GRE, MPLS headers |
Applications: | Multi-protocol local network to protect multicast data |
Security: | data protection, prevent leakage |
Company Info. |
Chengdu Shuwei Communication Technology Co., Ltd. |
Verified Supplier |
View Contact Details |
Product List |
Network Packet Broker GTP GRE PPTP L2TP PPPOE Tunneling Protocol Label Header Stripping Tunneling Protocol Identify Technology in Network Packet Broker
Supported automatically identify various tunneling protocols such
as GTP / GRE / PPTP / L2TP / PPPOE. According to the user
configuration, the traffic output strategy can be implemented
according to the inner or outer layer of the tunnel
What is GRE Tunneling Protocol?
GRE(Generic Routing Encapsulation)can encapsulate Data packets of
some network layer protocols (such as IPX, ATM, IPv6, AppleTalk,
etc.) so that these encapsulated data packets can be transmitted in
another network layer protocol (such as IPv4).GRE provides a
mechanism for encapsulating messages of one protocol in another. It
is a three-layer tunneling technique that allows messages to be
transmitted transparently through the GRE tunnel, solving the
transmission problem of heterogeneous networks.
GRE implementation mechanism is simple, the tunnel at both ends of
the equipment burden.The GRE tunnel can connect to the local
network of various network protocols through the IPv4 network,
effectively utilizing the original network architecture and
reducing the cost.The GRE tunnel extends the scope of hop-limited
network protocols to enable flexible enterprise network
topologies.The GRE tunnel can encapsulate multicast data and ensure
the security of voice, video and other multicast services when
combined with IPSec.GRE tunnel support enables MPLS LDP. GRE tunnel
is used to carry MPLS LDP messages, LDP LSP is established, and
MPLS backbone network is interoperable.The GRE tunnel connects
discrete subnets and is used to set up VPNS for secure connections
between corporate headquarters and branches.
The protocol responsible for forwarding encapsulated packets is
called the transport protocol.
GRE header | Fields Explain |
C | Check and verify bits |
K | Keyword bits. |
Recursion | Represents the number of encapsulated layers of a GRE message. Add
1 to this field after completing a GRE package. Discard the text if
the number of packages is greater than 3.The purpose of this field
is to prevent messages from being encapsulated an infinite number
of times. |
Flags | Reserved fields. Must be set to 0 currently |
Version | Version field. It has to be 0 |
Protocol Type | Identifies the protocol type of passenger agreement. The common passenger protocol is the IPv4 protocol with the protocol code 0x0800 |
Checksum | Checksum fields for GRE headers and their loads. |
Key | Keyword field, the tunnel receiver is used to verify the received message. |
Network Packet Broker Tuneling Label stripping at GRE Application
Scenarios
4) Set up L2VPN and L3VPN through GRE tunnel
In general, MPLS VPN backbone networks usually use LSP as the
public network tunnel.If the core device (P device) of the backbone
does not have MPLS, and the edge device (PE device) does, then the
backbone cannot use LSP as the public network tunnel.At this point,
the backbone can use the GRE tunnel instead of the LSP to provide a
layer 3 or 2 VPN solution on the backbone.
LDP over GRE technology enables MPLS LDP on the GRE tunnel
interface, USES the GRE tunnel to carry MPLS LDP messages, and
establishes LDP LSP.
As shown in the figure above, an enterprise deploying L2VPN or
L3VPN services between PE1 and PE2 needs to establish a LDP LSP
across the GRE tunnel between PE1 and PE2 due to the fact that the
backbone equipment may not be enabled or support MPLS.
As shown in the figure above, a ldp-lsp across the GRE tunnel can
be established by establishing a GRE tunnel between PE1 and P2 when
MPLS is supported by the backbone P2 device, but not by the P1
device.
5) GRE tunnel was adopted for CE to access MPLS VPN
VPN service based on MPLS backbone network can provide better
service than traditional IP VPN.Therefore, MPLS VPN technology is
the mainstream VPN technology chosen by operators.But the Internet
is based on IP technology, and the backbone network based on IP
technology is still abundant.
In MPLS VPN, a direct physical link between CE (Customer Edge) and
PE (Provider Edge) devices of MPLS backbone network is often
required to connect the client device CE (Customer Edge) to the
VPN, that is, in the same network.In such a network, the VPN needs
to be associated with the PE to CE physical interface on the PE.
However, in the actual network, not all CE and PE can be directly
connected by physical links.For example, many organizations that
are already connected to the Internet or ip-based backbone networks
are geographically far apart from their CE and PE devices, making
direct access to MPLS backbone PE devices impossible.This prevents
direct access to MPLS VPN sites from the Internet or the IP
backbone.
To make CE accessible to MPLS VPN, consider creating a "logical
direct connection" between CE and PE.That is, you can connect CE
and PE using a public or private network and create a GRE tunnel
between CE and PE.In this way, can be regarded as CE and PE
directly connected.When you associate a VPN with the pe-ce
interface on a PE, you can use the GRE tunnel as a physical
interface on which to associate a VPN.
5.1 GRE through the public net
5.2 GRE for VPN traversal
5.3 GRE for private networks
What kind Network Packet Broker and Network Taps support Tunneling Protocol Identify Technology?
Network Packet Broker Specification and Module Type
Component type | Product Model | Basic Parameter | Remarks |
Chassis | NTCA-CHS-7U7S-DC | Height:7U,7 slots, ATCA Chassis, double star 100G backplane, 3 high voltage DC(240VDC~280VDC) input,3* 2+1 redundant 3000W power modular | Must choose one |
NTCA-CHS-7U7S-AC | Height:7U,7 slots, ATCA Chassis, double star 100G backplane, 3 high voltage AC(240VDC~280VDC) input,3* 2+1 redundant 3000W power modular | ||
Service card | NT-TCA-SCG10 | 100G exchange card,10*QSFP28 interface | Choose according to actual business needs |
NT-TCA-CG10 | 100G service card,10*QSFP28 interface | ||
NT-TCA-XG24 | 10G service card,24*SFP+ interface | ||
NT-TCA-RTM-CG10 | 100G RTM card,10*QSFP28 interface | ||
NT-TCA-RTM-EXG24 | 10G RTM card,24*SFP+ interface | ||
TCA Visibility Embedded software system | NT-TCA-SOFT-PKG | must |
![]() |