5 Ply Foldable FFP2 Particle Filtering Half Mask

5 Ply Foldable FFP2 Particle Filtering Half Mask

User instructions:

Failure to follow the instructions and warning on the use of this mask during all times of exposure can reduce the effectiveness of the mask and could result in illness or disability.

As with any respiratory device, the wearer must be adequately trained prior to use. Before use, the wearer should always check the mask is in good condition- no dirt, no damage to headharness attachment etc

Limitation:

Do not use the respirator or enter or stay in a contaminated area under the following circumstances:

a Atmosphere contains less than 19.5% oxygen.

b If you smell or taste contaminant.

c For protection against gases or vapors.

d Contaminants or their concentrations are unknown or immediately dangerous to life or health.

e For sandblasting, paint-spray operations and asbestos treatment.

f In explosive atmospheres.

Warning:

1 This mask marked “NR”, shall not be used for more than one shift.

2 Never substitute, modify, add, or omit parts in the configuration as specified by the manufacture.

3 This mask helps protect against certain particulate contaminants but does not completely eliminate exposure to the risk of contracting disease or infection.

4 It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal.

5 Change the mask immediately if breathing becomes difficult or the mask becomes damaged or distorted.

6 Change the mask if a proper face seal cannot be achieved.

Fitting instruction:

1 Hold the particle filtering half mask in position over the nose and mouth.

2 Pull the headharness behind to ears, attach the headharess to the retaining clip, improve comfort and prevent leakage.

3 Ensure the nose clip is securely moulded around the nose, resting the ends against the cheek to obtain a good seal.

4 To check for proper fit, cup both hands over the mask and exhale vigorously. If air leaks around the nose, tighten the nose clip, if air leaks around the edge, reposition the headharness for better fit.

5 Repeat adjustments until the mask is sealed properly.

6 If a proper seal cannot be achieved do not enter the contaminated area or it may cause illness.

Storage:

1 Store the mask in a sealed container away from contaminated areas when not use.

2 Store the mask in the original packing during transport.

Hunan EEXI Technology&Service Co., LTD., founded in 2018, is an enterprise engaged in the production of baby and maternity products. The company covers a total area of 88,000 square meters with a building area of 137,000 square meters. After the outbreak of the “COVID–19” in 2020, our company applied and obtained the production license of medical devices and other qualifications within a short time and transformed into the production of KN95, disposable medical masks (non-sterile and sterile, including children size face masks) and surgical masks (non-sterile and sterile). Currently, our company has built 100 production lines for disposable face masks (including two high-speed mask machines) and 150 sets of KN95 equipment. With a total number of over 6000 employees, our company produces more than 10 million disposable masks and more than 6 million masks per day. Worldwide acknowledged certifications such as CE/FDA/ISO, including ISO9001, ISO14001 and ISO13485, certificated by SGS/TUV/CCQS etc.