6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules

6321C is a two component EPOXY adhesive product, specially developed for Hollow fiber membrane modules.

6321C is a two component EPOXY adhesive product, specially developed for Hollow fiber membrane modules. It has excellent properties as low viscosity, low hollow fiber climbing height, low heating point, room temperature curing, long working time and low shrinkage. Glue cured with high hardness,high compressive strength and good chemical material resistance.

Typical application
Used for the assembly of Hollow fiber membrane potting.

How to use
1.Clean up the surface of bonding materials, keep dry and clean. Oil or dusty may influence the adhesive properties.

2.Stir the component A before use, mix the glue completely 2:1 by weight, we recommend using auto-mix equipment, or the mixed glue should be handled by vacuum system before operation.
3.Dispensing the mixed glue into the potting position.
4.Wait over 8 hours, then transfer to the next process, if in winter low temperature, can be heated for faster cure.

Cautions
1. When Manual mix, please don’t mix too much glue one time, and use the mixed compound as soon as possible.
2.The component A may be a little higher viscosity in winter low temperature, we suggest you pre-heat over 2 hours under
30℃, please keep the packaging open, to avoid the gas expand, what may destroy the container.
3.Seal the unused glue for next time use, contaminated glue should no longer put into the original packaging pail.
4.Keep away from the children
5. Please refer to the product MSDS for safety information.

Packaging
Set 1: 6321C - A, 200KG/drum, 6321C - B, 200KG/drum;
Every set: 2 drums A and 1 drum B, 600KG/1 set.
Set 2: 6321C - A, 25KG/pail, 6321C - B, 25KG/pail.

Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solving the problem of necklace. With over 2,000 products spanning six disciplines, our offerings find extensive application in new energy, transportation, 5G communication, consumer electronics, aerospace, and beyond. We are committed to delivering new material one-stop solutions for high-end manufacturing industry head customers.

Huitian New Material has 6 R&D bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam, providing customers with a stable supply of multi-series, high-quality products, and possessing a large-scale manufacturing capacity; the existing core R&D team consists of more than 300 people with PhDs and master's degrees, and it is the first "National Enterprise Technology Centre" in the domestic adhesive new material industry. Huitian New Material has been continuously investing in R&D for a long time, a joint development with customers, and forward-looking product reserve, constantly refining sustainable R&D capability; Huitian people's high-efficiency organizational force quickly responds to customers' needs and empowers and adds value to customers' products.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced-level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude