Hepa Filter Portable Solder Fume Extractor for PCB soldering
|Diameter of Dust:||75mm|
|Machine Adjustment||Speed-adjusting knob|
Less than 55db
1.The fume extractor has eally effective intelligent “filter element blockage alarm”
function gives an acousto-optic alarm immediately upon filter
2.The fume extractor has excellent purify effect with four-stage purification design: filtering step by step enables
harmful smoke to be better purified. Even for objects at least 8
times smaller than PM2.5, the purification rate can reach up to
3. The solder fume extractors are widly used and the pre-filters and Main Filters can be replaced separately, which can
reduce the cost and easy to replace.
4. Wheels are available for the fume extractor which is easy to move
5. The fume extractor has a triple-filter system design.
1) Pre-Filter: the large-size pad filter can filter large particles
2) Middle Filter: it filters the bigger powders for prolonging the
main filter's life.
3) Main Filter: it includes HEPA (high efficiency) filter and gas
filter. The HEPA cleans the gas and powders filtering from the
pre-filter and then carry them to the gas filter. which with the
carbon and other chemical combination, filters off the deleterious
substance and then outputs the clean air.
6. We have been selling a good quantity of our solder fume
extractors to Germany, Israel, UK and a few other European
countries. And we got quite good and positive feedback from them on
the quality and performance of our products.
7. We make really effective fume extractors only which are widely
used in the process of soldering, laser marking & carving,
1.With the intelligent control panel and digital display, the
operation becomes easy and simple. By pressing the button, you can
freely adjust the air volume and set the working time,. you can
achieve real-time monitoring on the working status.
2. Equipped with the remote control, the operator can control the
machine from a distance.
3.With the truly sensitive and effective "Filter Clogging Alarm
System". When the filter gets saturated and clogged, the machine
will give sound and light alarms within 20 seconds. It notifies the
operator to replace the filter in time, to guarantee a comfortable
4. The High-voltage and large-volume brushless motor, ensure low
vibration, low noise, stable operation. and long life span.
5. Ducts can be bent or lengthened as desired and maintain their
shape after adjustment, letting you place them exactly where
suction is needed.
6. The machine surface is made of metal, more corrosion resistance
7. With square absorbing hood which have bigger filter area
8. Provide trundle with brake, easy to move castors
Waterun Technology Co.,Ltd manufacturing a variety of high quality
air purification systems for filter the harmful substances. Our
line of floor, bench top, mounted and portable units serve a
variety of applications including welding, soldering,
manufacturing, laboratory and pharmaceutical operations.Don’t
despair if you don’t see your application listed below! Our modular
product line can be configured in a number of different ways to
address your specific requirements.Contact us today to find out the
soldering fume extractor
laser cutting, laser engraving and marking
welding, laser welding
medical, moxibustion, moxa-moxibustion
beauty fume extraction
Pharmaceutical and laboratories, chemical
Our company uses a brushless motor, compare with the ordinary
motor, this motor speed is higher, lower noise, it does not require
maintenance, but longer product life span. Self-developed impeller,
better quality than ordinary plastic impeller, more stable, more
powerful suction. The unique tiered filter design, can effectively
purify the toxic and harmful substances in the air, such as
formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and
use of low cost.
Compared with the products from foreign countries, our products in
terms of the effect is almost the same, but the majority of our
products are less than USD2000, so our products are cost-effective,
and the use of more affordable cost. The products from abroad
mainly purify the viruses and bacteria as the main direction of
governance. In China not only to purify viruses, bacteria, but also
clean harmful smoke pollution. WHO estimates that there are over
200 million people deaths each year due to inhalation of indoor and
outdoor air pollution in small particles.
1. What’s the functions for the filters?
Answers. 1) Pre-Filter/F8 pre-filter: the large-size pad filter can
filter large particles of dust (according the requirement to select
pre-filter or F8)
2) PP Middle Filter/Fiber glass filter: it filters the middle-size,
small size particles bigger powders for prolonging the main
filter's life. (according the requirement to select PP middle
filter or fiber glass filter,can use both, the efficiency better.)
3) Main Filter/Active carbon: it cleans harmful particles and
4) High efficiency filter(combine middle filter and active carbon
filter): it can filter about 0.3micron particles and other harmful
2. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2)
energy saving (3) easy installation, flexible remove (4) low cost
(5) reduce the incidence of diseases and major diseases, and health
is priceless (6) to reduce unpleasant smell (7) to reduce dust and
other harmful substances, and so on.
3. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000
hours, consider environmental factors. Usually it can use 4-5 years
without any problems.
4. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we
suggest not more than 1.5meter. For multi-station, the total pipe
length should not exceed 10 meters.
5. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
6. How long need to to replace the pre-filter, middle filter and the
Answer: 1. Pre-filter : normally needs to replace by 1 months
2. Middle filter: normally needs to replace by 3 months
3. Main filter: normally needs to replace by 6 months.
7. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent
8. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100%
of poison gas, but you can make a different filter net rate upon