Top selling solder resist exposure machine 1m Manufacturer for
producing PCB CE approved
The UV LED exposure machine is for printing printed circuit board
and dry the solder mask, the ultraviolet light inside the machine
transfer the image information on the film to the device on a
surface coated with a photosensitive material. The UV LED exposure
unit is also for curing resistance welding.
The LED lamp machine is most different from mercury lamp, Lower
energy usage, and increased production speeds.
1. 80% of energy conservation, no cooling water consumption.
2. Ultra high energy, can effectively replace of traditional
8KW/10KW/12KW mercury lamp, resistance welding exposure machine.
3. The exposure area: 1060mmx750mm/1280mmx750mm/1500mmx750mm
High precision aspheric lens optical combination, parallel
half-angle of light projection less than 2 deg. Circuit board
resolution can reach75μm (Glass surface50μm).
|Light source||UV LED Parallel||UV LED Parallel||UV LED Parallel|
|Degree of vacuum||≤-90Kpa||≤-90Kpa||≤-90Kpa|
You save money in many ways!
1.) Less energy required and short exposure times. Saving you money
on utility cost
2.) Less money for bulbs. Saving you money in maintenance cost
3.) Less time required to do the job. Saving you money in
4.) Less heat generated during operation. Saving you money in
facility cooling cost
5.) Less down time due to bulb issues. Saving your money and
reducing the stress.
6) LED point-to-point correction system for real-time, real time
monitoring of each light emitting element light intensity status
and do correction one by one, reduce the number of defective
|A cost comparison between UV LED exposure Unit and the traditional
Mercury lamp exposure machine|
|Model/Project||8KW traditional water-cooling|
|Average power||25KW||5.5KW||Double side exposure|
|One month electric charge||25*16*30*0.17=USD$2040||5.5*16*30*0.17=USD$448.8||16 hours/day, $0.17/kwh|
|One year electric charge||USD$24480||USD$5385.6|
|Replacement mercury cost||12*242/piece=USD$2904||None||Do not contain water and repair bills|
|Total cost||USD$27384||USD$5385.6||Save$ 21998.4|
No more yearly bulb changes due to output loss or flickering bulbs.
The KST 2000's average a life span of 50,000 - 100,000 hours with
little output loss.
Using 100,000 hours in more practical terms would equate to the
exposure of 30 screens a day using a 10 second exposure time,
working 365 days a year you’re looking at 10 years of expected bulb
That is practically 10 years for making screens without changing a
That means more money in your pocket.
IV. OUR COMPANY:
Dongguan KST Automation Technology Co.,Ltd as an environmental
protection facility manufacturing enterprise with the integration
of production, scientific research and sale, we have been focusing
on UV LED exposure machine for more than 10 years. We offer
products with approved CE.At the beginning of 2012, KST set up a new team, committed to the
UV LED curing equipment, R & D and production of UVLED exposure
machine, specialized in the most professional UV LED exposure
machine. By the end of 2013, KST has invested 20 million RMB to set
up a joint venture with the world-renowned optical corporation
Japan CCS Sumitomo Electric Industries with headquarter in Dongguan
so as to enhance the R&D ability of optics products in the
entire company, becoming the global LED optics products R&D
manufacturing base. Based on the actual needs of the domestic
circuit board manufacturers, KST developed the first section of
high-performance UV LED exposure machine through the introduction
of Japan's advanced optical technology. The various indicators have
reached the industry-leading level, laying a solid foundation for
the development of UV.
VI. OUR SERVICES:
1/ Welcome to visit our factory
2/ Supply with Training
3/ Great after-service
4/ OEM acceptance
5/ overseas service available
6/ 24 months warranty
- Real leading manufacturer (established in 2011, now working area
- Qualified exporting manufacturer (with CE certificates and many
- 24 months warranty and lifelong service
- Professional service teams, R & D team and technician team
- Abundant experience in serving the upscale market
- Working with us, you can lower your cost for producing PCB &
solder mask, as we are factory direct and have the economy of