Gold mining wet pan mill Dia1200 :
Introduction of the wet pan mill:
The machine mainly used with gold, silver, lead, zinc, iron,
molybdenum, copper, antimony mine, mine, all ball mill can be
selected grind gold machine can be used. Characteristics: grind
gold through the raw material mixing, rolling, crushing, rolling
repeatedly reach moisture equilibrium ratio of uniform, low gas
content, improve the forming rate and forming quality, grind the
material through the machine molding Products with high density,
good strength, no porosity ratio weight. Energy efficient, high
volume of output, the product is used for iron ore process tailings
recovery, not to slag the loss of effective resources can be fully
Wet pan mill working principle:
1.Firstly the motor will transmit the motive power to reduction
gears,under the drive of reduction gears it
passing through large vertical spindle,then the power cabient
transfers to above whippletree.
2.The whiffletree pulls the two runner wheels rotation,runner
wheels not only revoluting around
the large vertical spindle but also could retating by themselves.
3.After adding into grinding materials, the materials are under the
extrusion of grinding roller weight to revoluting and rotating
with runner wheels,when twisting form huge friction force with
grinding base. And after suffering
repeated extrusion, the materials can be crushed thoroughly.
Wet pan mill selection method and technology for gold ore selection
1.After installation and debugging ,add about 5kg mercury in the
bottom of the wet pan mill ,then start the wet pan mill to work
2.Collect the gold sand every shift,when hand over to the next
shift,add 1kg mercury to collect the gold sand and mercury in the
bottom of the pan mill,pur the mercury in the gold instrument ,use
the high density red cloth to pack out the mercury,open the red
cloth,the rest is gold sand.
3.Add 1 kg mercury when every shift start working. Put the catch
gold carpet ,and pur mercury plate ,then can collect gold.
Features of the wet pan mill:
1.The wet grinding mill is a new mill, small investment, high
yield, the production cost is low, good benefits.
2. Grind gold machine's easy installation and maintenance, small
investment, high yield, quick, low-cost production, is the ideal
equipment for mine SMEs beneficiation.
3.The grinding wheels mix up the ores and produce ore pulp while
pressing and rubbing the ores.
4. The ores and water are evenly mixed, which makes the pulp
density and other indexes stable.
5.After the grinding process, the monomers are taken to the upper
surface of the pulp and discharged through the overflow outlet of
the water basin. Meanwhile, the coarse ores sink to the bottom of
grinding base, being grinded continuously till they reach the
6.The screening mesh set up at the overflow outlet of the water
basin classifies the ore fineness strictly to avoid the
over-grinding and uneven fineness, which helps create better
condition for next working process.
Wet pan mill technical parameters:
Rotate Speed (r/min)