Categories | Application Box |
---|---|
Brand Name: | Everflon |
Model Number: | M120 |
Certification: | ISO;RoHS;Reach;SGS |
Place of Origin: | China |
MOQ: | 1000 kg |
Packaging Details: | 25kg in Plastic Bag and Packed in Drum |
Size: | 90-120um |
Appreance: | White Powder |
Procesiing: | Moulding |
Package: | 25kg in Drum |
Materials: | 100% Virgin PTFE |
Application: | Lining, Tubing, Gasket |
Company Info. |
Hubei EverFLON Polymer Co.,Ltd |
View Contact Details |
Product List |
PTFE Resin / PTFE Suspension Powder / 90-120um size / Moulding Processing
Properties of Everflon PTFE Resins
Everflon® PTFE Suspension Powder is preferred for moldings requiring optimum mechanical and electrical properties. Its low bulk density limits the size of moldings from a given mold or press opening. It is often preferred for making filled compounds, especially with metal powders that are difficult to mix because of density differences.
Main Application of Everflon PTFE M40
1. Pad.
2. Rod
3. Sheet
Main Processing Way of Everflon PTFE M40
Everflon® PTFE M usually is processed in two steps: preforming and sintering:
The powder is first compacted into a preformed shape approximating
that of the desired molding. A precise
heating (sintering) and cooling cycle is then used to consolidate
the molding at temperatures above the crystalline melting point of
the neat powder.
The properties of a finished molding are dependent on perform
pressure, sintering time and temperature, and cooling rate.
The details please visit www.everflon.com.
Package&Delivery
Everflon® PTFE Suspension Powders’ preforming is easiest when the resin is
uniformly between 21–27 °C (70–80 °F). As temperatures decline
below this range, the resin will be increasingly difficult to mold
without cracks and problems with condensed moisture. Higher
temperatures inhibit flow and promote lumping.
Storage conditions should be set accordingly. Cleanliness is a
critical requirement for successful use of Everflon® PTFE Suspension Powder. The white resin and high sintering
temperatures cause even small foreign particles to become visible
in finished moldings. Keep resin drums closed and clean. Good
housekeeping and careful handling are essential.
Data List of Everflon PTFE M120
ITEM | UNIT | ASTM | M120 |
---|---|---|---|
Average Partical Size | um | D2116 | 90-120 |
Apparent Density | g/L | D638 | 450 |
Melting Point | °C | D638 | 325 |
Tensile Strength | MPa | D4591 | >30 |
Elongation | % | >330 | |
Specific Gravity | g/cm3 | 2.16 | |
Water Content | % | <0.04 |
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们