High Speed CNC Angle Punching, Marking and Single Balde Cutting
This machine is mainly composed of transverse conveyor, rotating
loading system, infeed conveyor, CNC infeed carriage, punching
unit, marking unit, cutting unit, unloading conveyor, as well as
hydraulic, electrical and pneumatic systems etc.
1. Feeding speed and punching speed are very fast. The speed is 3
times higher than previous common angle line machines. Greatly
improve the production efficiency.
2. There are two sets of punching die-station on each side which can
be installed two kinds of punches with different diameters.
3. Marking unit adopts closed frame with good rigidity. Four sets of
character boxes are fixed on the marking unit which can be selected
by program. Marking stadia can be set at will.
Adopt CNC technology, servo motor in feeding, with high efficiency,
stable work piece precision. Key hydraulic, pneumatic and electric
parts all imported.
4. Hydraulic system mainly serves for punching, cutting, marking,
pressing and transposition of character boxes. All marking,
punching and shearing in automatic completeness, all finished
angles can be unloaded by pneumatic turnover device so as to
lighten the working strength.
5. Control system consists of upper computer, CNC system, servo
motor, PLC and outside detection switch etc. Processing program can
be generated automatically as long as operator inputs the dimension
of workpiece. It can also accept certain processing program which
is made from special software. The program can be stored, selected,
displayed and communicated as per the workpiece No.
6. X,A,B CNC axis are driven by imported brushless AC servo motors.
The CNC system is controlled by imported PLC, which attached with
three axis CNC modules. The modules and three axis servo system
constitute a position control loop. The photoelectric encoder feeds
back the information. Closed loop control to ensure high
7. Single blade shearing ensures smooth shearing section and save raw
material. With function of self-diagnosis for failures.
|Functions||Punching, marking, cutting|
|Max. length of blank (m)||12|
|Max. length of finished (m)||10|
|Max. Punching (dia. х thi.) (mm)||Φ26×10(Material:Q345 510N/mm2)|
|Max. Punching elliptical hole (dia. х thi.) (mm)||Ф22×50×8 (Material:Q345 510N/mm2)|
|Punches per side||2|
|Punching force (kN)||630|
|Marking force (kN)||630|
|Cutting force (kN)||1800|
|Group of Marking letters||4|
|Number of letters per group||12|
|Dimension of letter (mm)||14×10×19|
|Cutting mode||Single blade cutting|
|Max. Cutting capacity|
|Feeding speed of angle (m/min)||80|
|Cooling method of hydraulic system||Water cooling|
|Processing precision||Accordance with GB2694|
|Program function||Input by keyboard and USB interface|
Single Blade Cutting