Case/pouch,OLED Digital Finger Oximeter, Pulsioximetro Blood
Oximetro Pulse Rate Heart Rate Monitor, Fingertip Pulse Oximeter
Fingertip Pulse Oximeter
This Fingertip Pulse Oximeter is a kind of innovated medical device
with non-invasive and continuous features for artery SPO2 and PR
detection. Being portable, it is able to measure SPO2 and PR values
quickly and precisely.
Product Operation Scope
The fingertip Oximeter can be used to measure human haemoglobin
saturation and heart rate through finger. The product applies to
using in family, hospital (including clinical use in
internist/surgery, anaesthesia, paediatrics, intensive care, etc.),
oxygen club, social medical organizations, physical care in sports
(It can be used before or after sports. Operation in sport
procedure is not recommended). It is also applicable to enthusiasts
on mountaineering, patients (convalescents at home or those need
first aid treatment), elders over 60, those work more than 12
hours, sporters and those work in the hermetic circumstance, etc.
The product is not suitable to monitor patient continuously.
1. Install two AAA batteries into battery cassette before covering
2. Plug one finger into rubber hole of the Oximeter (it is best to
plug the finger thoroughly) before releasing the clamp with the
3. Press button on the front panel;
4. Donot tremble your finger when the Oximeter is working. Your
body is not recommended on moving status.
5. Press the button on the front panel, if we want change display
6. Read relevant datum from display screen.
7. If there is no signal input, oximeter can shut off
8. Please replace new batteries when OLED indicates the batteries
are in low power.
Detailed descriptions of product functions
1. Display Type:Two colors OLED display
2. with beep sound
3. SpO2:Measurement range:70~99
Accuracy:±2% on the stage of 70~99,Unspecified(≤70) for SPO2
4. PR:Measurement range 30BPM~240BPM
Accuracy:±1BPM or ±1%(the larger one)
5. Power: two AAA 1.5V alkaline batteries
6. Power consumption:below 30mA
7. Automatic power-off:the product shuts off by itself when no
finger is in the product in 8 seconds
9. Operation Environment:Operation Temperature:5~40
Ambient Humidity:15%~80% on operation
10%~80% in storage
Air Pressure: 70kPa~106kPa
10. Declaration:EMC of this product comply with IEC60601-1-2
11. Measurement Performance in Low Perfusion Condition:required
test equipment (BIO-TEK INDEX Pulse Oximeter tester) could measure
the available pulse wave with the amplitude of 6% of the simulation
pulse wave amplitude.
12. Interference Resistance Capacity against Ambient Light::Device
works normally when BIO-TEK INDEX Pulse Oximeter tester exerts
interfering signal test.
- 1 x Fingertip Oximeter
- 1 x Lanyard- 1 x English user's manual
Optional Color for the Finger Pulse Oximeter
- Pink, Blue, Light Purple, Green, Gray
If you have color demands,please leave message to us.
If we don't receive your requirements for color, we will deliver in
random color. Thanks for your understanding!