Light Weight Walls Concrete Slab Formwork And Scaffolding
tensile strength:40 KN
model: concrete slab formwork
save labor and time
1. light weight, high strength
2. sustainable and enviroment friendly
5. easy operation
Modular formwork is an easy and intuitive system of PP formworks
for building concrete walls, basements, columns. Compared with the
traditional timber or steel systems, modular formwork is handier,
more cost effective and faster to set up, save time and labor
charge. Modular formwork has panels of various sizes, fastened
together by means of fast-lock nylon handles. Thanks to the several
possible panel combinations, and special inner and outer corner
elements, the possible wall thickness goes from 10 to 40 cm.
The biggest panel is 120x60cm, weight only 10.5kg, which can be
lift and set up by only one person easily, need no
crane on the site.
easy set up
Different size of panels can be firmly locked bysimply turn the
special handles to 90 degree. The
panels have rib on the back, which makes the system need not
traditional wood blocks and nails.
The panels have holes to fit tie rod, guarantee the strength of the
The material of modular formwork is PP (polypropylene) mixied with
special glass fibres which enable panels to hold high pressures.
The handles are made by high strength Nilon, each panel
locked by at least 4 handls, which makes the whole system strong
enough to pour 40cm walls.
The system need not cut and nail due to the variety size, and
nearly need no wood, the material can be recycled after broken,
will not pollute the enviroment. In practice using, the corner of
panels is easier broken relatively compared with the panel itself,
our modular formwork have 4 small corner pieces to be replaced
seperately, makes the panels can be reused about 100 times.
Concrete does not stick to plastic, thus the panels need no oil
before using, and can be cleaned simply by water. The surface of
the wall which built by modular formwork is smooth, can be left
Walls and corners
Using modular formwork, it is possible to pour up to 40cm thick and
3 meters highstraight walls one time. Combining with special
corners and compensation panels, right angle walls, three way
T-walls and four way cross walls can be fomed easily. The low
weight and modularity of modular formwork makes it ideal for fence
walls as it is possible to move large gangforms by hand.
Basins and elevator shafts
The low weight of modular formwork simplifies the pouring of tanks,
basins and swimming pools in
areas with limited or no access to heavy equipment. Modular fomwork
also ideal for elevator shafts as it can use without aid of crane,
can make an easy, fast and precise job by hand.
Doors and windows
To make doors and windows by modular formwork is simple, by
inserting inside the formwork a wooden frame corresponding to the
size of the opening needed, and then pour the walls with doors and
Adjustable Column panel
The column panels are interconnected using the standard nylon
locking handles. Each panel will require 9 handles. The forming
face has 6 parallel rows of fixing holes to allow the orthogonal
connection of the panels in a “star” shape. The rows are placed at
a distance of 100/50mm the one from the other, allowing the forming
of square and/or rectangular columns with side of 150 to 600mm.